E82/E88 (2004-2012)

This air intake system produces 7 max horsepower, 7 lbs. x ft. torque and out-flows the factory intake by 60%. Featuring a distinctive clear-coat aluminum cover, this air intake system offers a washable/reusable conical air filter with inverted top. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece black powder-coated heat shield requires little or no assembly easy installation and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This system includes a special mounting bracket for the active steering reservoir (optional). Learn More

Factory BMW intake systems are well known to be very efficient. The Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air from behind the kidney grilles into the airbox, with a noticeable power gain found at higher speeds on vehicles equipped with our High Performance Filters. The ICS pieces are constructed from nearly indestructible polyethylene, which prevents heatsoak and will not bend, distort or rust after years of use. Learn More

The Dynamic Air Scoop (D.A.S.) from aFe is a simple way to increase air velocity through the kidney bean grille. These scoops are built from lightweight, powder coated aluminum and are easy to install. Learn More

Macht Schnell is proud to offer a high quality, high performance and high protection original equipment direct replacement air filter – specifically for your N54 powerplant. Combined with our Intake Charge Scoops (ICS), this matched combo will provide maximum air delivery for your N54 engine with noticeable power gains. Learn More

This Stage 2 cold air intake system produces 27 max horsepower, 34lbs. x ft. torque and out-flowed the factory intake by 98%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter and scoops. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Learn More

This Stage 2 cold air intake system produces 17 max horsepower, 23lbs. x ft. torque and out-flowed the factory intake by 44% on the awesome BMW N55 E90, E92 and E93. This system includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical Pro 5R air filter for maximum flow. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Learn More

This Stage 2 Sealed Intake produces 12hp and 16lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a heat-shielding molded plastic housing; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as an attractive black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Learn More

This all new Sealed Intake System produced 9hp and 14lbs. x ft. torque and outflows the factory intake by 20%. This system uses a PRO 5R progressive weave filter for maximum airflow and increased performance. This unique sealed air intake system uses a one piece rotomolded air intake tube that snaps onto the factory lower air box for a quick hassle free installation. The lower air box retains your factory ram air scoop to keep cool air flowing for maximum power gains. This installation takes approximately 20 minutes and comes complete will all necessary hardware. Learn More

Made in Japan, GruppeM Ram Air Intakes epitomize the GruppeM philosophy of attention to detail. By replacing the factory air handling systems, increased airflow streams into the combustion chamber. For the GruppeM intake for the BMW E82/E88 135i & 1M, the factory ductwork is replaced with heat-shielding carbon fiber with enhanced inlets to capture the maximum amount of air. Lower intake air temperatures carry higher concentrations of oxygen, allowing for more energetic explosions and producing more horsepower and torque. Of course, reliability is never sacrificed - high-efficiency, high-flow K&N air filter materials prevent contaminants from interfering with proper engine function. Learn More