991

If the hydraulic assist on your factory Porsche 996 Turbo or X50 is giving you trouble with racing through the gears, then you might want to check out this new product from Agency Power. The GT2 slave conversion kit gets rid of the hydraulic assist to give your clutch pedal a stiffer more responsive feel to it. The factory slave does fail sometimes so this product can serve as a replacement or an upgrade. The kit includes a CNC machined aluminum bracket that fits on top of the transmission to mount the new components. In addition, a shorter rod is included which keeps the pedal travel limited yet still offering a comfortable daily driving machine. New OEM Porsche parts are included to replace the existing hardware. The blue anodized bracket is mounted on to the transmission which requires it to be removed from the vehicle. This kit includes all parts that are needed for installation. It will fit all Porsche 996 Turbo, Turbo S, X50 cars from 2001-2005. Item number 170024 Manufacturer Agency Power Weight 10.0 lbs Learn More

The Porsche 996 Turbo and C4S model was designed and built with high performance braking in mind. However, this amazing platform has now become a popular vehicle for the track use. With track racing comes the needs for improved braking over what the stock 4piston 330mm brakes can handle. Brake engineering at the simplest is about how you can have clamping force over a large surface area and dissipate the heat to keep the brakes from fading. What Agency Power has engineered is a Plus 1 Bracket Kit which allows you to take the factory 4piston 330mm brakes and upgrade to the 350mm OEM rotors that are found on the Porsche 997 Turbo. This bracket kit is essentially a spacer that goes between your caliper and the wheel carrier to allow your caliper to fit over the larger rotors. The larger rotors will give you increased surface area to provide you better braking and longer pad life. Our brackets are CNC machined 6061 aluminum to keep the weight down. Since this is an important safety component, we have had the brackets hard anodized. The kit includes longer bolts needed to install as well as new washers. Each bracket is laser engraved with the AP logo and if it is a front or rear unit. Each Kit is sold as a pair of fronts or pair of rears. These kits fit all 2001-2005 Porsche 996 Turbo or C4S with standard non ceramic brakes. Item number 170025 Manufacturer Agency Power Weight 10.0 lbs Learn More

We have had so much success with our Agency Power bolt in roll/harness bar for the 996/997 that we decided it was time to make one for the 991 Carrera. The 996/997 bar fit all models of the 911 chassis including the Carrera, Turbo, GT3, GT2. The 991 chassis will be the same which gives us the advantage to have a product for all models of the new 2013 and up 911. Considered a harness bar, the bolt-in unit gives the driver something to secure their racing harnesses to for track days while giving that GT3 race look. What makes the other roll bars for the previous generation hard to sell is the shipping. Since they are all 1 piece hoops with removable harness and diagonal bars, they have to ship on a pallet via truck freight. Domestically this can cost up to $300 and international shipping can be thousands! Diversifying our product for the Porsche 991 Carrera, we made the all 1818 steel tube bolt-in bar to have extremely strong slip fit connections. On the 996/997 bar, you had to remove the front seats to install it. Though we made it slightly lower to accomondate sunroof models, the chance of scratching something on install was prevalent. In designing this 991 harness bar | roll bar, we aimed to make it even more user efficient and friendly. Having created similar items for other vehicles using this design, it allows for a super easy install or quick removal. The top hoop is connected to the b-pillars with a slip fit design and quick release pins. Using the lower seat belt mount on the b-pillar with a stout steel bracket, this allows for the seat to be position and reclined far back to accomondate up to a 6Ɖ driver. With the material and design, it is still very safe and provides the functionality and look 991 owners need. This is a great add on product for weekend DE drivers. The roll bar | harness bars are available in several different powdercoat finishes and are built to order. Item number 160189 Manufacturer Agency Power Weight 24.0 lbs Learn More

Continuing on the path of performance modularity for the Porsche 991 Carrera, Agency Power now has their new center muffler X-Pipe exhaust.This exhaust is designed to be modular with the rest of the stock exhaust system. To keep all pieces OEM fitting the same, like the factory center muffler, this exhaust is designed to work with the factory oval tips that are connected from the 2nd mufflers. The exhaust was tested on a Porsche 991 Carrera S with the stock headers and secondary mufflers mated to the new center X-Pipe exhaust. The baseline of the car has a very waivy ride through the RPM band. From 3000rpm to 6400rpm the car made consistant power. From 3800-4200rpm the car made huge gains of torque! The rest of the curve yielded about a 20hp gain until it ran out of steam near redline. In regards to the sound, the XPipe alone made for a really crisp tone that can be tolerated to even the most sensitive driver. Being that it made this sports car more sporty, it makes the 991 more enjoyable for daily driving. In addition to the great sound and power, the rear XPipe also saves about 20lbs off the rear end of the car. This product is designed to fit all Porsche 991 Carrera non S vehicles with Single Oval Tips from 2013+. Item number 180072 Manufacturer Agency Power Weight 40.0 lbs Learn More

Continuing on the path of performance modularity for the Porsche 991 Carrera, Agency Power now has their new center muffler X-Pipe exhaust. Like Agency Power's Porsche 991 headers and 2nd Muffler Bypass Pipes, this exhaust is also interchangeable with the stock parts. To keep all pieces OEM fitting the same, like the factory center muffler with its 3rd chamber, Agency Power has incorporated a separate exhaust pipe that comes off near the X design. This floats behind the exhaust tip for a full stock look. We tested the center pipe in conjunction with each stock part of the 991 Carrera to hear the difference in sound and see the affects on the performance. The first test on the Porsche 991 was with the stock headers and secondary mufflers mated with the new center X-Pipe exhaust. The baseline of the car has a very waivy ride through the RPM band. Whether testing in sport or regular mode, this did not change the performance curve. Keeping a consistant variable, all tests were done in sport mode. From 3000rpm to 6400rpm the car made consistant power. From 3800-4200rpm the car made about 50hp and 80ft/lbs of torque! The rest of the curve yielded about a 20hp gain until it ran out of steam near redline. In regards to the sound, the XPipe alone made for a really crisp tone that can be tolerated to even the most sensitive driver. Being that it made this sports car more sporty, it makes the 991 more enjoyable for daily driving. In addition to the great sound and power, the rear XPipe also saves about 20lbs off the rear end of the car. This product is designed to fit all Porsche 991 Carrera vehicles from 2013+. Item number 180073 Manufacturer Agency Power Weight 40.0 lbs Learn More

OSIR Design O-Shield 6 Polycarbonate Clear iPhone 6 & 6s Plus Case Very sleek design, protect your iPhone with this very strong polycarbonate case without sacrificing and covering up the beautiful design and color of your iPhone. FEATURES ICE CLEAR versionlets you show off the true color of your iPhone with ice effect. Strong tight fit design- Will not out from the phone when dropped. Cross grip design - Better grip experience in landscape position, better pickup exprience on flat surface. Raised camera opening design- Prevents camera lens from scratches. Raised side edges design- Prevents scratches from the iPhone faces down on flat surfaces. SIM Card Slot Opening- Swap your SIM cards without removing the O-SHIELD. FREE SHIPPING WORLDWIDE Item number 120101 Manufacturer OSIR Design Learn More

All AutoTecknic mirror caps are made according to its OEM counterpart to ensure a 100% fit. AutoTecknic replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not chip away or break off easily. Our products go through rigorous tests and quality control before they are released to the public. Features: Includes passenger and driver side. Direct OEM replacement. Item number 80126 Manufacturer AutoTecknic Weight 4.0 lbs Learn More

All AutoTecknic mirror caps are made according to its OEM counterpart to ensure a 100% fit. AutoTecknic replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not chip away or break off easily. Our products go through rigorous tests and quality control before they are released to the public. Features: Includes passenger and driver side. Direct OEM replacement. Item number 80125 Manufacturer AutoTecknic Weight 4.0 lbs Learn More

From the factory, Porsche uses cheap plastic on the 991. The chrono eyelids cover are the case in point. To remedy this issue, we created a solution, carbon fiber chrono eyelid cover. Instead of seeing the cheap plastic every time you get in your 991, you can upgrade to our Carbon Fiber chrono eyelid cover to enhance your 991's interior appeal. You will notice our beautiful carbon fiber pieces every time you open the door and you'll appreciate your 991 even more! Fit: 2012.5 or newer 991 Carrera models with Sport Chrono. Item number 90286 Manufacturer AutoTecknic Weight 4.0 lbs Learn More