996

Are you a nonbeliever of aftermarket air intakes and think that what Porsche created for the 996 Turbo is truly the best? Well, Agency Power has developed the ultimate air intake system for the new age Porsche 996 Turbo owner. We introduce the Agency Power Dual Flow Carbon Air Intake Kit for the Porsche 996TT. The intake will fit on the standard 996TT and X50 rear deck lids. Others such as the GT2 deck lid may require modifications. This air intake uses the factory OEM back half of the intake box which includes the fault free OEM MAF tube. What we have done is beefed up the front cover with a full carbon fiber unit which is designed to intake more air volume which is then traversed over the flat panel air filter. The biggest improvement of this box is the dual snorkel. We have built a carbon fiber intake scoop which mounts on the bottom of the left side of the engine deck lid. This scoop takes the airflow from the vented deck lid and pushes it through the snorkel piece and down into the stock air box. The purpose of this design is to increase air flow to the factory filter. In high speed or racing conditions, the intake needs to be able to get as much air as possible to keep these turbos working efficient. This dual snorkel unit combined with our updated OEM box cover and a K&N flat panel air filter does wonders for your overall vehicle performance. These made in the USA (Arizona) carbon fiber parts are a work of art. They are clear coated and have a great finish. Included with the intake are the aluminum Agency Power badge and foam strips for a precise air tight seal from the snorkel to the box. The intake kit does not include the aftermarket drop in filter. Any of the OEM replacement filters will work with this box. *Note: The 2nd carbon intake snorkel works with the OEM and Agency Power silicone boost hoses. The Samco boost hose kit does have clearance issues. Item number 110303 Manufacturer Agency Power Weight 10.0 lbs Learn More

A set of five reinforced silicone turbo hoses for the Porsche 996 which include our CNC machined "push fit" couplings to ensure ease of installation and longevity. These hoses will withstand greater temperatures and pressures than the OEM hoses and look absolutely fantastic. Available in Red, Blue or Black. Please select the colour required in the options below. Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation. Item number 110179 Manufacturer Forge Motorsport Weight 10.0 lbs Learn More

Agency Power has a brand new Blow Off Valve solution for the Porsche 996 Twin Turbo cars. The Porsche like many European cars has a sensitive MAF. Running a 100% vent to atmospheric valve on most stock or mildly tuned vehicles will cause check engine lights and vehicle performance issues. Since the stock Bosch plastic diverter valves leak boost and robs you of power, Agency Power has developed this single Blow Off Valve kit to give you the best boost consistency and sound out t HERE. Having dual diverter valves is not necessary as the F-Hose is straight through so both valves get the pressure equally. The Agency Power Blow Off Valve has an upgrade spring and piston design to handle up to 50psi of boost! The valve has an adjustable top to help set the stiffness of the spring depending on your vehicle setup. Whether you are running .7bar or 1.3bar, the valve can give you optimal boost consistency. In addition to being adjustable, the valve can be setup in 3 different configurations. You can set it up as a full recirculation like a stock valve, full 100% atmospheric for high horsepower race cars, or even 50/50 for street cars wanting that Blow Off Valve sound. The Valves are made from CNC machined 6061 aluminum with nylon washers and a brass piston to keep movement and air venting for the life of the car. Each body has the Agency Power logo laser engraved on it and the adjuster knob is triangular for easy grip. The single Blow Off Valve kit works on all Porsche 996TT from 01-05 and fits in the stock or aftermarket Agency Power F-Hose. Each kit includes 2 plugs for the factory holes and new worm clamps. Additional plugs or horns can be purchased separately. Valves come in polished silver, red, or black. Item number 110163 Manufacturer Agency Power Weight 4.0 lbs Learn More

Agency Power has a brand new Blow Off Valve solution for the Porsche 996 Twin Turbo cars. The Porsche like many European cars has a sensitive MAF. Running a 100% vent to atmospheric valve on most stock or mildly tuned vehicles will cause check engine lights and vehicle performance issues. Since the stock Bosch plastic diverter valves leak boost and robs you of power, Agency Power has developed this single Blow Off Valve kit to give you the best boost consistency and sound out t HERE. Having dual diverter valves is not necessary as the F-Hose is straight through so both valves get the pressure equally. The Agency Power Blow Off Valve has an upgrade spring and piston design to handle up to 50psi of boost! The valve has an adjustable top to help set the stiffness of the spring depending on your vehicle setup. Whether you are running .7bar or 1.3bar, the valve can give you optimal boost consistency. In addition to being adjustable, the valve can be setup in 3 different configurations. You can set it up as a full recirculation like a stock valve, full 100% atmospheric for high horsepower race cars, or even 50/50 for street cars wanting that Blow Off Valve sound. The Valves are made from CNC machined 6061 aluminum with nylon washers and a brass piston to keep movement and air venting for the life of the car. Each body has the Agency Power logo laser engraved on it and the adjuster knob is triangular for easy grip. The single Blow Off Valve kit works on all Porsche 996TT from 01-05 and fits in the stock or aftermarket Agency Power F-Hose. Each kit includes 2 plugs for the factory holes and new worm clamps. Additional plugs or horns can be purchased separately. Valves come in polished silver, red, or black. Item number 110163 Manufacturer Agency Power Weight 4.0 lbs Learn More

Agency Power has just given Porsche 996TT owners another way to get an easy 25 bolt-on horsepower with this new 84mm race plenum and throttle body kit. Agency Power set out to engineer and design a plenum that was functional, did not require additional tuning, and simply... made power! The plenum is 6061 aluminum that retains the same shape as the factory T Pipe. The reason to keep a standard T shape is that the engine works off of pulses. Just like how Porsche designed, Agency Power kept this design and simply improved the restriction, the throttle body. The factory throttle body inlet size is 76mm that then jumps up to a 78mm ID plastic plenum. Agency Power has chosen to use a 84mm Porsche throttle body which improves the top end power over the already great 78mm Agency Power throttle body kit. The T shape plenum features all the necessary vacuum and breather hose ports as stock for a true bolt on application. Each plenum features a CNC machined throttle body flange that includes the necessary recessed gasket for a sealed fit. The complete T plenum is TIG welded and then powdercoated gloss black inside and out for a smooth and stealth finish. This kit includes both the plenum and Porsche OEM throttle body to be used on all Porsche 996 Turbo, X50, or GT2 from 2001-2005. Note: The Use of This Race Plenum and Throttle Body Requires Custom ECU Tuning. Item number 110301 Manufacturer Agency Power Weight 10.0 lbs Learn More

Making power on your Porsche 996 Turbo, X50, or GT2 is as easy as adding an exhaust and a ECU Flash. But what happens when you take the stock boost of .6-.7bar (K16 Turbos) and double it? The factory wastegates can really limit how power is delivered to your Porsche Turbo reducing performance. With the Agency Power 1.0bar wastegate actuator kit, this can all changed. A wastegate is simply a turbine bypass valve. It works by diverting some portion of the exhaust gas around, instead of through, the turbine. This limits the amount of power that the turbine can deliver to the compressor, t HEREby limiting the turbo speed and boost level that the compressor provides. When this boost level is reached, the valve will open and begin to bypass exhaust gas, preventing boost from increasing. The factory wastegate spring on the K16 or K24 turbos has to work much harder then the ECU programmed boost level. Usually this means that as the boost solenoid takes over keeping the wastegate shut, it is struggling to keep the boost delivery. A 1.0bar wastegate running manifold pressure only will make 1.0bar or 14.3psi of boost. This means that with the control of the factory or external boost controller, the wastegates will stay shut until the spring limit is reached and open up at 1.0bar giving you much more responsive and immediate power delivery all the way to redline. Since most ECU tuned cars are running 1.1-1.3bar of boost, these upgraded wastegates can be largely beneficial. Wastegates are sold as a pair. Wastegates fit all 2001-2005 Porsche 996 Turbo, X50, or GT2 vehicles. Item number 110305 Manufacturer Agency Power Weight 4.0 lbs Learn More

This piston style diverter valve is an excellent replacement for your factory diaphragm valve- great for holding increased boost pressure and it's construction allows for maintenance offering increased longevity over stock. This billet aluminum, and hard anodized DV will also provide smoother power delivery as well. Fully servicable and can be upgraded with stiffer springs for higher boost applications (coming soon). Item number 110276 Manufacturer Pwrhaus Weight 2.0 lbs Learn More

One of the most important upgrades for the Porsche 996, Cayenne Turbo or Panamera Turbo is to replace the factory Bosch diverter valves. The factory valves are prone to leaking pressure under increased boost when the car has an upgraded ECU flash. As well, the factory Bosch valves will taper boost off with the diaphragm design even at stock boost levels. To help keep the boost pressure constant all the way to redline, upgrading the stock diverter valves to the Agency Power Racing Diverter Valve Kit will improve your cars overall performance. These valves are CNC machined 6061 aluminum which have been precision engineered to fit with the stock or aftermarket F-Hose and intake return hoses. The internal construction of the valve uses a machined piston with proper o-rings to ensure a smooth motion that is air tight to prevent any boost leaks. The spring has been engineered to hold moderate to aggressive boost increases on the 996TT, Cayenne TT and Panamera TT vehicles. The valves feature a 90 degree removable swivel connection for easy fitting with the factory vacuum hose. If needed, the top of the valve unscrews allowing you to re-greased and service the valve. Valves are available in a polished finish and feature the Agency Power text and logo laser engraved on the top. As tested, these valves are a great upgrade for stock K16 or K24 cars and have even been used in our 700HP turbo kits. Valves are sold as a pair for the 2001-2005 Porsche 996 Turbo, 2004-2007 Cayenne Turbo and 10+ Porsche Panamera Turbo. Please select your desired color below. Item number 110169 Manufacturer Agency Power Weight 4.0 lbs Learn More

Fitment Guide All VAG 1.8T engines All VAG 2.7 Bi-Turbo engines Porsche 911/996 turbo Ford Focus RS Renault Clio Made from billet aluminium, this recirculating diverter valve dumps the charge-air back into the air intake system keeping external noise to a minimum. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. DUMP VALVE FITTING INSTRUCTIONS Download instructions on how to fit the FMDV006 and FMCL007P valves to the Audi TT: Click to Download DUMP VALVE SERVICING INSTRUCTIONS Download instructions on how to service the FMDV006 and FMCL007P valves: Click to Download REVIEWS OF OUR VALVES For an independant test of our Dump Valves click here To view a spring tuning kit for this valve click here Please note that these valves are available in a machined alloy (silver) finish or anodised black. Please select you choice in the options below. Item number 110132 Manufacturer Forge Motorsport Weight 2.0 lbs Learn More