996

With performance handling in mind, Agency Power has released their all new Performance Rear Sway Bar Links for the Porsche 996 Carrera 2 and 4. Why sway bar links? The factory sway bar links utilize a simple design, ball joint and thin connecting rod. This style of links can be found on several makes and models of different vehicles. However, for the purist, the hardcore driver, and the weekend racer, these factory links are not enough. One of the first performance modifications you make in handling is the sway bars to assist with over and under steer. During aggressive driving scenarios, these factory links will flex and create a non rigid feeling. The Agency Power Rear Sway Bar Links for the Porsche 996 will change this immensely. These rear end links are made of high grade 6061 CNC machined aluminum. The link maintains the same thickness throughout the length giving it a very strong structural integrity. The spherical bearings (monoballs) are used instead of urethane bushings for longevity as well as reduced noise. The bearings are sealed to prevent from wear and tear caused by dirt, water, mud, etc. Each bearing is held in place with a C clip to allow easy maintenance if desired. All hardware is stainless steel to prevent from rust and long term corrosion. The stainless metal collars are designed to give the link the correct alignment when attached to the shock body and sway bar. Each bolt uses an allen head for easy installation. Finally, the Agency Power Porsche Sway Bar Links are anodized in Royal Blue and engraved with the stylish AP logo. Not only standing out in your rear suspension setup, but offering you an edition that will truly enhance your handling performance. Fits: Porsche 996 C2, C4 99-04 and 996 TT 01-05. Item number 160016 Manufacturer Agency Power Weight 4.0 lbs Learn More

We took our famous Carbon Fiber dual flow intake and made a less expensive version with this Matte Black edition. Eliminating the cost of carbon fiber, this kit is built in strong composite material then painted matte black to match the OEM intake characteristics. Read more below! Are you a nonbeliever of aftermarket air intakes and think that what Porsche created for the 996 Turbo is truly the best? Well, Agency Power has developed the ultimate air intake system for the new age Porsche 996 Turbo owner. We introduce the Agency Power Dual Flow Air Intake Kit for the Porsche 996TT. The intake will fit on the standard 996TT and X50 rear deck lids. Others such as the GT2 deck lid may require modifications. This air intake uses the factory OEM back half of the intake box which includes the fault free OEM MAF tube. What we have done is beefed up the front cover with a full composite unit which is designed to intake more air volume which is then traversed over the flat panel air filter. The biggest improvement of this box is the dual snorkel. We have built a composite intake scoop which mounts on the bottom of the left side of the engine deck lid. This scoop takes the airflow from the vented deck lid and pushes it through the snorkel piece and down into the stock air box. The purpose of this design is to increase air flow to the factory filter. In high speed or racing conditions, the intake needs to be able to get as much air as possible to keep these turbos working efficient. This dual snorkel unit combined with our updated OEM box cover and a K&N flat panel air filter does wonders for your overall vehicle performance. These made in the USA (Arizona) composite parts are a great add-on to your 996TT. Included with the intake are the aluminum Agency Power badge and foam strips for a precise air tight seal from the snorkel to the box. The intake kit does not include the aftermarket drop in filter. Any of the OEM replacement filters will work with this box. Note - Some carbon pictures are shown as well. Item number 110304 Manufacturer Agency Power Weight 40.0 lbs Learn More

Making power on your Porsche 996 Turbo, X50, or GT2 is as easy as adding an exhaust and a ECU Flash. But what happens when you take the stock boost of .6-.7bar (K16 Turbos) and double it? The factory wastegates can really limit how power is delivered to your Porsche Turbo reducing performance. With the Agency Power 1.0bar wastegate actuator kit, this can all changed. A wastegate is simply a turbine bypass valve. It works by diverting some portion of the exhaust gas around, instead of through, the turbine. This limits the amount of power that the turbine can deliver to the compressor, t HEREby limiting the turbo speed and boost level that the compressor provides. When this boost level is reached, the valve will open and begin to bypass exhaust gas, preventing boost from increasing. The factory wastegate spring on the K16 or K24 turbos has to work much harder then the ECU programmed boost level. Usually this means that as the boost solenoid takes over keeping the wastegate shut, it is struggling to keep the boost delivery. A 1.0bar wastegate running manifold pressure only will make 1.0bar or 14.3psi of boost. This means that with the control of the factory or external boost controller, the wastegates will stay shut until the spring limit is reached and open up at 1.0bar giving you much more responsive and immediate power delivery all the way to redline. Since most ECU tuned cars are running 1.1-1.3bar of boost, these upgraded wastegates can be largely beneficial. Wastegates are sold as a pair. Wastegates fit all 2001-2005 Porsche 996 Turbo, X50, or GT2 vehicles. Item number 110305 Manufacturer Agency Power Weight 4.0 lbs Learn More

Agency Power has added this silicone "F-Hose" to its line up of performance products for the Porsche 996TT. The silicone hose is a direct replacement of your factory unit. The hose is 4 ply silicone and is designed to withstand more boost pressure and never crack or fail like the factory unit. This hose will also prevent any potential boost leakage and loss of horsepower. The F-Hose works with the factory diverter valves or aftermarket ones. We recommend running aftermarket valves for best performance. Dress your engine bay up, as these hoses are available in matching colors with our boost hoses. Red, Blue, Silver, and Blue are all available. F-Hose kit includes stainless steel clamps for easy fitment. Fits on all 2001-2005 Porsche 996 Turbos. Made in the USA! Item number 110306 Manufacturer Agency Power Weight 10.0 lbs Learn More

Continuing the process of building the ultimate Porsche 996TT, Agency Power has developed these highly engineered and proven silicone boost hose kits. Like any turbo charged vehicle, air needs to flow in the most efficient way to maximize performance. At a certain level, factory components will not produce the same results. Agency Power's silicone boost hose kit replaces the 4 factory rubber boost hoses with these high quality and purpose driven silicone kit. The silicone hoses each have a precision CNC machined 6061 aluminum ends for a secure and direct fit into the factory or aftermarket intercoolers and intake manifold. Each machined aluminum part is barbed to give a secure fit and then the silicone is clamped on fashionably. Each hose has a small AP logo placed on it. The hoses are designed to improve air flow by not allowing the hoses to expand under boost pressure. Like a brake line, when under pressure, the factory hoses can expand. The silicone tube keeps the structural integrity thus not changing boost pressure and keeps your power up. The factory rubber hoses can deteriorate over time and even blow out! These boost hoses have been tested to over 30psi. The boost hoses are available in red, black, blue, silver, and yellow. Hoses are designed to fit all Porsche 996TT from 01-05. Made in the USA! Item number 110307 Manufacturer Agency Power Weight 10.0 lbs Learn More

Agency Power High Flow Racing Intercoolers Porsche 997TT 07-09 As you step up the power level on your 997 Turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. Street and track cars will heavily benefit from the use of our upgraded intercoolers. The factory Porsche intercooler core is great, but their end tanks are what is lacking. Agency Power has developed these complete intercooler replacements for your Porsche 997 Turbo. Some modifications are required to the intercooler frame and vehicle for fitment. The bar and plate intercooler core is designed to provide maximum cooling efficiency for turbo cars producing up to 950 horsepower. The cast end tanks are aluminum and then precision welded to the thick racing upgraded cores. The ends of the intercoolers are designed to work with your factory style boost hose fittings or our Agency Power silicone boost hose kit. The intercoolers retain the factory mounting positions and come in a polished finished. The intercoolers fit all Porsche 997 TT and GT2 vehicles from 2007-2009. Dimensions: -Core Thickness: 3.5 inch -Core Volume vs. Stock: 40% larger -Performance Efficiency: 85% -Flow rate: 620 CFM / side -Leak Tested: @ 30 PSI -Pressure Drop: less than 1% -Support HP: 750+ **Modification to the plastic housing is required to fit these intercoolers. In additional 3-4 hours of labor will be required for them to work.** Item number 110312 Manufacturer Agency Power Weight 30.0 lbs Learn More

If your taking the next step in power mods on your Porsche 996 or 997 Turbo, upgrading your torque converter is a great idea. From experience, the stock torque converter is usually good to around 700 horsepower. The Tiptronic transmission requires many different upgrades to go beyond that power level, but starting with the torque converter is a must! Upgrading a torque converter is much like port and polishing a head on an engine. Our transmission partners disassemble the complete unit and modify the internals. Without giving away their trade secrets, they insist the upgrade makes this TC invincible. The stall speed is increased about 400rpm and the upgrade comes with a 1 year limited warranty. The torque converter upgrade REQUIRES you to send in your torque converter to be modified. Once we receive your order, we will contact you with more information. This usually takes about 1-2 weeks. Express work is available at an additional charge. Item number 190091 Manufacturer Agency Power Weight 50.0 lbs Learn More

If the hydraulic assist on your factory Porsche 996 Turbo or X50 is giving you trouble with racing through the gears, then you might want to check out this new product from Agency Power. The GT2 slave conversion kit gets rid of the hydraulic assist to give your clutch pedal a stiffer more responsive feel to it. The factory slave does fail sometimes so this product can serve as a replacement or an upgrade. The kit includes a CNC machined aluminum bracket that fits on top of the transmission to mount the new components. In addition, a shorter rod is included which keeps the pedal travel limited yet still offering a comfortable daily driving machine. New OEM Porsche parts are included to replace the existing hardware. The blue anodized bracket is mounted on to the transmission which requires it to be removed from the vehicle. This kit includes all parts that are needed for installation. It will fit all Porsche 996 Turbo, Turbo S, X50 cars from 2001-2005. Item number 170024 Manufacturer Agency Power Weight 10.0 lbs Learn More

The Porsche 996 Turbo and C4S model was designed and built with high performance braking in mind. However, this amazing platform has now become a popular vehicle for the track use. With track racing comes the needs for improved braking over what the stock 4piston 330mm brakes can handle. Brake engineering at the simplest is about how you can have clamping force over a large surface area and dissipate the heat to keep the brakes from fading. What Agency Power has engineered is a Plus 1 Bracket Kit which allows you to take the factory 4piston 330mm brakes and upgrade to the 350mm OEM rotors that are found on the Porsche 997 Turbo. This bracket kit is essentially a spacer that goes between your caliper and the wheel carrier to allow your caliper to fit over the larger rotors. The larger rotors will give you increased surface area to provide you better braking and longer pad life. Our brackets are CNC machined 6061 aluminum to keep the weight down. Since this is an important safety component, we have had the brackets hard anodized. The kit includes longer bolts needed to install as well as new washers. Each bracket is laser engraved with the AP logo and if it is a front or rear unit. Each Kit is sold as a pair of fronts or pair of rears. These kits fit all 2001-2005 Porsche 996 Turbo or C4S with standard non ceramic brakes. Item number 170025 Manufacturer Agency Power Weight 10.0 lbs Learn More