996

Agency Power Plus 1 Rear Brake Caliper Bracket Porsche 996TT/C4S 01-05

170027

The Porsche 996 Turbo and C4S model was designed and built with high performance braking in mind. However, this amazing platform has now become a popular vehicle for the track use. With track racing comes the needs for improved braking over what the stock 4piston 330mm brakes can handle. Brake engineering at the simplest is about how you can have clamping force over a large surface area and dissipate the heat to keep the brakes from fading. What Agency Power has engineered is a Plus 1 Bracket Kit which allows you to take the factory 4piston 330mm brakes and upgrade to the 350mm OEM rotors that are found on the Porsche 997 Turbo. This bracket kit is essentially a spacer that goes between your caliper and the wheel carrier to allow your caliper to fit over the larger rotors. The larger rotors will give you increased surface area to provide you better braking and longer pad life. Our brackets are CNC machined 6061 aluminum to keep the weight down. Since this is an important safety component, we have had the brackets hard anodized. The kit includes longer bolts needed to install as well as new washers. Each bracket is laser engraved with the AP logo and if it is a front or rear unit. Each Kit is sold as a pair of fronts or pair of rears. These kits fit all 2001-2005 Porsche 996 Turbo or C4S with standard non ceramic brakes. Item number 170025 Manufacturer Agency Power Weight 10.0 lbs Learn More

$159.99

Agency Power Plus 1 Front Brake Caliper Bracket Porsche 996TT/C4S 01-05

170026

The Porsche 996 Turbo and C4S model was designed and built with high performance braking in mind. However, this amazing platform has now become a popular vehicle for the track use. With track racing comes the needs for improved braking over what the stock 4piston 330mm brakes can handle. Brake engineering at the simplest is about how you can have clamping force over a large surface area and dissipate the heat to keep the brakes from fading. What Agency Power has engineered is a Plus 1 Bracket Kit which allows you to take the factory 4piston 330mm brakes and upgrade to the 350mm OEM rotors that are found on the Porsche 997 Turbo. This bracket kit is essentially a spacer that goes between your caliper and the wheel carrier to allow your caliper to fit over the larger rotors. The larger rotors will give you increased surface area to provide you better braking and longer pad life. Our brackets are CNC machined 6061 aluminum to keep the weight down. Since this is an important safety component, we have had the brackets hard anodized. The kit includes longer bolts needed to install as well as new washers. Each bracket is laser engraved with the AP logo and if it is a front or rear unit. Each Kit is sold as a pair of fronts or pair of rears. These kits fit all 2001-2005 Porsche 996 Turbo or C4S with standard non ceramic brakes. Item number 170026 Manufacturer Agency Power Weight 10.0 lbs Learn More

$159.99

Agency Power Front Carbon Lip for Porsche 996 Turbo 01-05

150441

Agency Power and Agency Power’s carbon fiber division have collaborated to build this new front lip spoiler for the Porsche 996 Turbo bumper. Agency Power has worked closely with sister company Agency Power to develop many Porsche productsand this is just one more quality piece that adds to the complete package. This Made in the USA (Arizona) carbon lip spoiler is a direct replacement for the small OEM turbo lip. The lip spoiler was designed off of the factory 996TT Aero Kit lip spoiler dimensions. The lip spoiler fits using the factory mounting holes that are pre-drilled on the inside of each fender. It slides into position on the front of the bumper for a secure and functional fit. The spoiler features 4 vents for a stylish look and has the aluminum Agency Power badge embossed in the center. Each product will feature UV protectant resin and clear coat to significantly reduce any sun fade or yellowing and keep a glossy shine. The lip spoiler will fit any Porsche 996 that uses the factory lower lip spoiler on a Turbo bumper. Item number 150441 Manufacturer Agency Power Weight 65.0 lbs Learn More

$909.99

Agency Power Carbon Fiber Aero Kit Style Front Lip Spoiler Porsche 996 Turbo C4S 01-05

150442

Agency Power now offers this OEM Aero Kit Style carbon fiber front lip to compliment its other carbon fiber aero products available for Porsche vehicles. The front spoiler is made from 2x2 carbon weave and features a high gloss clear coat finish. The lip spoiler is very lightweight and durable as it fits in replace of the factory black plastic lip spoiler. Its slightly more aggressive look gives the front bumper that extra edginess the 996 Turbo deserves while enhancing aerodynamics. Its finished surface allows you to paint it or leave it as carbon fiber. This front lip spoiler replaces the small black polyurethane lip on the front bumper. It has a more aggressive rake to it but still allows proper ground clearance. This part fits all Porsche 996 Turbo and C4S from 01-05. Item number 150442 Manufacturer Agency Power Weight 65.0 lbs Learn More

$659.99

Agency Power Carbon Fiber Intercooler Duct Splitters Porsche 996 Turbo 01-05

150443

Add some style to your Porsche 996 Turbo or GT2 with a set of these carbon fiber intercooler duct splitters by Agency Power. The carbon fiber inserts fit into the factory intercooler air inlet and attach by simply screwing them place of the center of the duct. The duct splitter is carbon fiber on both top and bottom with the concave side facing up. They are sold as a pair. Using these requires removing the stock plastic ducts. Item number 150443 Manufacturer Agency Power Weight 15.0 lbs Learn More

$239.99

Agency Power 20pc Gloss Black Wheel Lug Bolt Set for Porsche

2000211

Do you hate those stock steel looking lug bolts on your Porsche? What about the chrome ones with your black wheels? Well finally Agency Power is HERE to the rescue with these Gloss Black Lug Bolts for the newer Porsche vehicles. The set of 20 wheel bolts replaces all your factory lug bolts and are the correct conical seat style for Porsche specific wheels. These are longer then stock bolts, and at 39mm in length, perfect for those that use spacers to ensure a safe amount of thread turns. The bolts are finished in a Gloss Black color that will not chip or scratch as they are powder coated. With proper torque on the 17mm bolt head, they will hold your wheels on securely. These lugs will fit all the new Porsche models including: Boxster|Cayman|997 Carrera|997 Turbo|997 GT3|996 Turbo|996 Carrera| 996 GT3. Note (10.18.2013): To reiterate the above, these bolts are longer than stock and are not meant to be an OEM replacement for stock wheels with stock offset. The bolts can be used with aftermarket wheels or stock wheels with spacers having enough threads turned in. Item number 200029 Manufacturer Agency Power Weight 10.0 lbs Learn More

$119.99

AP Front Adj Sway Bar Links for Porsche 996 Carrera and Turbo / 997 Turbo

1600113

When setting up the suspension on your Porsche Turbo or Carrera, being able to dial in a good corner balance and weight alignment will give you the best handling possible. As well, when you are upgrading suspension components, getting rid of any rubber bushings or ball joints for spherical bearings will enhance the vehicles response. Since these cars are all wheel drive, the front sway bar is under a lot of force and when properly setup, the stiffness of the bar can take a great toll on the factory sway bar links or those included with aftermarket coilovers. Agency Power has released these adjustable front sway bar links for the Porsche 996 Turbo and Carrera models. The sway bar link features a CNC machined aluminum turn buckle that has a slight bend for clearance purposes. The piece is anodized in blue and then laser engraved with the AP logo. The precision machined part features spherical rod ends on either side with opposite threads for on the fly adjustments. The 3 piece Teflon lined rod ends include CNC machined steel spacers which fit the 10mm and 12mm steal bolts. Both of these pieces are done in a black oxide finish to protect themselves from the weather elements. Unlike the factory part which is long and mounts near the bottom spring perch, these shorter, beefier sway bar links mount from the sway bar then connecting to the hub carrier w HERE the shock slides through. These sway bar links fit with most aftermarket sway bars and coilover setups. For those running GT3 sway bars on the 996C2, these are required for fitment. They are sold as a pair and include everything needed for installation. Fits Porsche 996 C2, C4, GT3, and Turbo as well as 997 Turbo. Item number 160015 Manufacturer Agency Power Weight 4.0 lbs Learn More

$334.99

AP Rear Adjustable Toe Link Kit for Porsche 996 and 997

1600112

Suspension has always been a specialty of Agency Power. With the current product list consisting of sway bars, control arms, sway bar links, and more, Agency Power has finally decided to add one more value to the Porsche suspension line up, the Rear Adjustable Toe Links. The stock suspension of the Porsche is a great start, but lacks a lot to improve cornering, adjust proper camber, and dial in the toe. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely then stock. The CNC machined links are made from 6061 aluminum. They are anodized blue to match other Agency Power products and then laser engraved with the AP logo. The rod end is a 3 piece Teflon lined design for extreme durability and longevity for street and race cars. The steel bolt is also specifically machined for this part to fit on to the wheel carrier without any hassle. The opposite end that goes to the chassis of the car includes 2 brass spacers and works with the stock alignment bolt. Each link includes a multi-sided flat to easily adjust on the alignment rack or at the track. The links are sold as a pair for the rear of the car, fitting the listed Porsche cars below. Porsche 996 C2, C4, C4S, Turbo, GT2, GT3. Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3 Item number 160017 Manufacturer Agency Power Weight 4.0 lbs Learn More

$609.99

AP Rear Adjustable Control Arms for Porsche 996 & 997

1600111

Racing is part of every Porsche owner's desire. Going fast is one thing, but giving your car the best handling possible is w HERE you will excel as a driver. Agency Power Industries has developed these adjustable control arms for your Porsche 996 and 997 vehicle. These control arms fit on the rear of your car and help in adjusting camber and toe. In additional to being fully adjustable, these control arms offer increased rigidity from the replacement of the factory urethane bushing with spherical bearing ends. The 6061 CNC Machined arms are anodized in our beautiful brilliant blue color and notched for easy adjustment. Each spherical bearing has CNC machined stainless steel fittings for a secure and safe fit. Control arms are sold in sets of 4 and fit all the 99-05 Porsche 996 and the 05+ Porsche 997 models. Item number 160018 Manufacturer Agency Power Weight 15.0 lbs Learn More

$639.99

Agency Power Race Roll Bar w/Harness and Diagonal Bar Porsche 996 997 Carrera GT3 Turbo

160193

Safety is always the number 1 priority in any high horsepower or track vehicle. For years, Agency Power has used others products to keep them safe on the track. Since the release of the Porsche 997, t HERE has been a very limited availability of quality roll bars on the market. Agency Power has worked exclusively with Agency Power to develop the best fitting and functional roll bar available for the Porsche 997 Carrera, GT3, and Turbo vehicles. And now its even better! The race roll bar fits the 99-05 Porsche 996 Carrera, Turbo, GT3, and GT2 also. Needing a roll bar for our Project 997 Turbo, we wanted to have something that would provide us the ultimate in protection but also be functional for those days w HERE you needed the back seats. Unlike other roll bars we have used in the past on our Project 996 Turbo, t HERE is no drilling required. This roll bar is a direct fit using the factory seat belt mounting points with the CNC machined bushings included. To 1 UP the competition, we have added functionality by creating a seperate removable diagonal and harness bar. The harness bar is essential for those at the track running their 4 or 5 point harnesses to keep them secured in the seat. The diagonal bar is added safety for roll over accidents and together they add rigidity to the chassis. However both these are removable to provide full functionality of the rear seats. Each bar is independent of each other mounting securely in place with the hardware provided. Another factor we added in production of this roll bar is to lower the height for easy installation and clearance on sunroof vehicles. Other companies roll bars are really designed for non sunroof cars or full track applications. As we found out testing another product, this hits your headliner causing damage to the beautiful suede interior. Once installed, t HERE is plenty of room to recline the seat or even move it backwards for the taller drivers. These bars meet safety regulations required by most event associations. To build these roll bars, a CNC precision mandrel bender was used to create the basic hoop shape which fits all Porsche 996 or 997 Turbo, Carrera, GT2, and GT3. The 1.5" diameter 1010 steel bars are robotically welded together. These roll bars are made exclusively for Agency Power by Agency Power and available in 3 colors for immediate shipping. Custom colors can be done for an additional charge. This item ships via oversized freight and includes all hardware needed for installation. Please select your color. Item number 160190 Manufacturer Agency Power Weight 24.0 lbs Learn More

$1,249.99