996

With performance handling in mind, Agency Power has released their all new Performance Rear Sway Bar Links for the Porsche 996 Carrera 2 and 4. Why sway bar links? The factory sway bar links utilize a simple design, ball joint and thin connecting rod. This style of links can be found on several makes and models of different vehicles. However, for the purist, the hardcore driver, and the weekend racer, these factory links are not enough. One of the first performance modifications you make in handling is the sway bars to assist with over and under steer. During aggressive driving scenarios, these factory links will flex and create a non rigid feeling. The Agency Power Rear Sway Bar Links for the Porsche 996 will change this immensely. These rear end links are made of high grade 6061 CNC machined aluminum. The link maintains the same thickness throughout the length giving it a very strong structural integrity. The spherical bearings (monoballs) are used instead of urethane bushings for longevity as well as reduced noise. The bearings are sealed to prevent from wear and tear caused by dirt, water, mud, etc. Each bearing is held in place with a C clip to allow easy maintenance if desired. All hardware is stainless steel to prevent from rust and long term corrosion. The stainless metal collars are designed to give the link the correct alignment when attached to the shock body and sway bar. Each bolt uses an allen head for easy installation. Finally, the Agency Power Porsche Sway Bar Links are anodized in Royal Blue and engraved with the stylish AP logo. Not only standing out in your rear suspension setup, but offering you an edition that will truly enhance your handling performance. Fits: Porsche 996 C2, C4 99-04 and 996 TT 01-05. Item number 160016 Manufacturer Agency Power Weight 4.0 lbs Learn More

A set of five reinforced silicone turbo hoses for the Porsche 996 which include our CNC machined "push fit" couplings to ensure ease of installation and longevity. These hoses will withstand greater temperatures and pressures than the OEM hoses and look absolutely fantastic. Available in Red, Blue or Black. Please select the colour required in the options below. Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation. Item number 110179 Manufacturer Forge Motorsport Weight 10.0 lbs Learn More

Evolution MotorSports V-Flow air induction systems are computer designed specifically for each individual application to give your engine maximum air flow, which means more horsepower, torque and improved performance. All V-Flow air intake systems have been dyno tested and tuned to provide maximum performance and efficiency. By utilizing computer-aided design, EVOMS designers produced the 996TT / GT2 air intake system to provide an unmatched fit, finish and superior air filtration. New for 2010 is the implementation of our exclusive 100% Oil Free “Synthamax” air filter technology. Our fully synthetic filter technology provides optimized flow with unmatched filtering properties which equals maximum power and protection Item number 110223 Manufacturer EVOMS Weight 15.0 lbs Learn More

This piston style diverter valve is an excellent replacement for your factory diaphragm valve- great for holding increased boost pressure and it's construction allows for maintenance offering increased longevity over stock. This billet aluminum, and hard anodized DV will also provide smoother power delivery as well. Fully servicable and can be upgraded with stiffer springs for higher boost applications (coming soon). Item number 110276 Manufacturer Pwrhaus Weight 2.0 lbs Learn More

Agency Power has added yet another important part for your Porsche 996 or 997 vehicles. Like most European cars, the shifting is very sloppy and needs to be stiffened up. AP has designed a lower short shift linkage that fits with the factory or aftermarket shifters. This linkage is 1 solid unit for rigidity using a plastic material insert which gives the shifter a stiff and accurate shift. The shift linkage fits over the stock cable housing giving you ability to adjust its tension for a perfect driving experience. The shift linkage is then tighten down with an easy access stainless steel locking bolt. The Agency Power shift linkage comes in Gray and fits all Porsche 996 and 997 from 1999 and on. This includes Carrera and Turbo models. The Agency Power shift linkage comes in Brilliant Blue and fits all Porsche Boxster and Caymen from 1999 and on. Item number 110300 Manufacturer Agency Power Weight 4.0 lbs Learn More

Agency Power High Flow Racing Intercoolers Porsche 996TT 01-05 As you step up the power level on your 996 Turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. Street and track cars will heavily benefit from the use of our upgraded intercoolers. The factory Porsche intercooler core is great, but their end tanks are what is lacking. Agency Power has developed these complete intercooler replacements for your Porsche 996 Turbo. The intercoolers require some modification to the intercooler frame and vehicle. The bar and plate intercooler core is designed to provide maximum cooling efficiency for turbo cars producing up to 950 horsepower. The cast end tanks are aluminum and then precision welded to the thick racing upgraded cores. The ends of the intercoolers are designed to work with your factory style boost hose fittings or our Agency Power silicone boost hose kit. The intercoolers retain the factory mounting positions and come in a polished finished.The intercoolers fit all Porsche 996 TT, X50, and GT2 vehicles from 2001-2005. Dimensions: -Core Thickness: 3.5 inch -Core Volume vs. Stock: 40% larger -Performance Efficiency: 85% -Flow rate: 620 CFM / side -Leak Tested: @ 30 PSI -Pressure Drop: less than 1% -Support HP: 750+ **Modification to the plastic housing is required to fit these intercoolers. In additional 3-4 hours of labor will be required for them to work.** Please select either 996 Turbo or 997 Turbo Item number 110302 Manufacturer Agency Power Weight 40.0 lbs Learn More

Are you a nonbeliever of aftermarket air intakes and think that what Porsche created for the 996 Turbo is truly the best? Well, Agency Power has developed the ultimate air intake system for the new age Porsche 996 Turbo owner. We introduce the Agency Power Dual Flow Carbon Air Intake Kit for the Porsche 996TT. The intake will fit on the standard 996TT and X50 rear deck lids. Others such as the GT2 deck lid may require modifications. This air intake uses the factory OEM back half of the intake box which includes the fault free OEM MAF tube. What we have done is beefed up the front cover with a full carbon fiber unit which is designed to intake more air volume which is then traversed over the flat panel air filter. The biggest improvement of this box is the dual snorkel. We have built a carbon fiber intake scoop which mounts on the bottom of the left side of the engine deck lid. This scoop takes the airflow from the vented deck lid and pushes it through the snorkel piece and down into the stock air box. The purpose of this design is to increase air flow to the factory filter. In high speed or racing conditions, the intake needs to be able to get as much air as possible to keep these turbos working efficient. This dual snorkel unit combined with our updated OEM box cover and a K&N flat panel air filter does wonders for your overall vehicle performance. These made in the USA (Arizona) carbon fiber parts are a work of art. They are clear coated and have a great finish. Included with the intake are the aluminum Agency Power badge and foam strips for a precise air tight seal from the snorkel to the box. The intake kit does not include the aftermarket drop in filter. Any of the OEM replacement filters will work with this box. *Note: The 2nd carbon intake snorkel works with the OEM and Agency Power silicone boost hoses. The Samco boost hose kit does have clearance issues. Item number 110303 Manufacturer Agency Power Weight 10.0 lbs Learn More

We took our famous Carbon Fiber dual flow intake and made a less expensive version with this Matte Black edition. Eliminating the cost of carbon fiber, this kit is built in strong composite material then painted matte black to match the OEM intake characteristics. Read more below! Are you a nonbeliever of aftermarket air intakes and think that what Porsche created for the 996 Turbo is truly the best? Well, Agency Power has developed the ultimate air intake system for the new age Porsche 996 Turbo owner. We introduce the Agency Power Dual Flow Air Intake Kit for the Porsche 996TT. The intake will fit on the standard 996TT and X50 rear deck lids. Others such as the GT2 deck lid may require modifications. This air intake uses the factory OEM back half of the intake box which includes the fault free OEM MAF tube. What we have done is beefed up the front cover with a full composite unit which is designed to intake more air volume which is then traversed over the flat panel air filter. The biggest improvement of this box is the dual snorkel. We have built a composite intake scoop which mounts on the bottom of the left side of the engine deck lid. This scoop takes the airflow from the vented deck lid and pushes it through the snorkel piece and down into the stock air box. The purpose of this design is to increase air flow to the factory filter. In high speed or racing conditions, the intake needs to be able to get as much air as possible to keep these turbos working efficient. This dual snorkel unit combined with our updated OEM box cover and a K&N flat panel air filter does wonders for your overall vehicle performance. These made in the USA (Arizona) composite parts are a great add-on to your 996TT. Included with the intake are the aluminum Agency Power badge and foam strips for a precise air tight seal from the snorkel to the box. The intake kit does not include the aftermarket drop in filter. Any of the OEM replacement filters will work with this box. Note - Some carbon pictures are shown as well. Item number 110304 Manufacturer Agency Power Weight 40.0 lbs Learn More

Making power on your Porsche 996 Turbo, X50, or GT2 is as easy as adding an exhaust and a ECU Flash. But what happens when you take the stock boost of .6-.7bar (K16 Turbos) and double it? The factory wastegates can really limit how power is delivered to your Porsche Turbo reducing performance. With the Agency Power 1.0bar wastegate actuator kit, this can all changed. A wastegate is simply a turbine bypass valve. It works by diverting some portion of the exhaust gas around, instead of through, the turbine. This limits the amount of power that the turbine can deliver to the compressor, t HEREby limiting the turbo speed and boost level that the compressor provides. When this boost level is reached, the valve will open and begin to bypass exhaust gas, preventing boost from increasing. The factory wastegate spring on the K16 or K24 turbos has to work much harder then the ECU programmed boost level. Usually this means that as the boost solenoid takes over keeping the wastegate shut, it is struggling to keep the boost delivery. A 1.0bar wastegate running manifold pressure only will make 1.0bar or 14.3psi of boost. This means that with the control of the factory or external boost controller, the wastegates will stay shut until the spring limit is reached and open up at 1.0bar giving you much more responsive and immediate power delivery all the way to redline. Since most ECU tuned cars are running 1.1-1.3bar of boost, these upgraded wastegates can be largely beneficial. Wastegates are sold as a pair. Wastegates fit all 2001-2005 Porsche 996 Turbo, X50, or GT2 vehicles. Item number 110305 Manufacturer Agency Power Weight 4.0 lbs Learn More